SH APX Beretta – Manual Mag-Fed Gel Blaster (Black) [CLEARANCE]

Description

APX Beretta – Manual Mag-Fed Gel Blaster [CLEARANCE]

Features:

• Brand: SenHui
• Model: APX Beretta
• Type: Manual / Mechanical / Spring-Powered
• Single-Shot, Pull-Back
• Approx 1:1 Scale
• Mag Fed
• Mag Capacity: Approx 30 Gel Balls
• 4-sided 20mm Tactical Rail
• Removable 20mm Tactical Rail
• Uses 7-8mm Gel Balls

Performance:

• Up to 110 Feet Per Second
• Up to 12m Firing Distance
• 1 Shot Per Pull Back of Slide

Package Content:

• 1 x APX BERETTA Gel Blaster
• 1 x Auxiliary Guide Rail
• 1 x Bottle
• 1 x Basic Pack of Gel Balls
• 1 x Magazine
• 1 x Protective Goggles

Instructions:

1. Soak Gel Balls for an absolute minimum of 6 hours, in a large container, making sure that the Gel Balls are completely submerged in water even after fully expanded. 
2. Remove magazine and fill it with hydrated Gel Balls through sliding panel at top of magazine.
3. Prime the Mag manually making sure to apply slightly leftward pressure while clicking downwards on the clicker and reinsert magazine.
4. When cocking the mechanism, grasp from the rear third of the slide pinching it as you pull it back in a smooth even motion.

• Do not snap release the slide.
• Do not pull trigger until slide has returned to starting position

Note: This is a manual Blaster and requires 100% correct user input to operate correctly. Please make sure you follow the instructions completely and accurately. Failure to do so will result in feeding issues and poor performance. This is a manual Blaster and does not shoot like an automatic battery operated Blaster and due to the many variables may occasionally fire a blank shot. This is normal. This item does not have beretta on the blaster itself.

***Please note: Gel balls included with Blasters are generally of low quality and can often cause feeding issues, we highly recommend purchasing our high quality Hardened Gel Balls for the best performance***

Gel Ball Hydration 101

Required:

1. Pack of Gel Balls
2. Bucket
3. Water

Gel ball / water ratio:

• 10,000 pack / 4L water
• 5,000 pack / 2L water
• 500 pack / 200ml water

Method:

Step 1: Empty gel ball pack into bucket.

Step 2: Fill bucket with water (more is better).

Step 3: Allow gel balls to soak for 6 hours minimum! (Overnight recommended)

 Your gel balls are now ready to use.

Storage: Up to 2 weeks in an airtight container away from sunlight. For best results, store in water and strain when needed.