Tag: gel blaster guns

Posted on by — Leave a comment

Is Gel Blasting Legal? | All You Need To Know

Gel Blasting Legal

Welcome to the world of gel blasting! Put a day out shooting at friends on your post-Covid bucket list, you’re in for a world of fun!
Gel blasting is a relatively new entry into the Close Quarters Battle (CQB) type game. Similar to paintball and airsoft, you shoot gel balls at the opposing team.


Gel balls hurt way less than paintballs and are almost all water with biodegradable polymers.
Gel blasting is a relatively new game played in a CQB (Close Quarters Battle) skirmish. It is similar to paintball but follows an airsoft-like honour-based game, as players show no signs of getting shot.


Gel blaster guns shoot 7 to 8mm biodegradable gel balls. They cause less pain if hurt as compared to paintballs and are made up of water.
Although gel blasters are safe to use and have less impact on the body. Protective eyewear or safety goggles is the only protection necessary.

There is some controversy surrounding the irresponsible use of gel blaster guns, causing them to be illegal in some states.

History Of Gel Blasting And How It Got Into Australia

After the ban of airsoft in 2008, gel blasters and the game of gel blasting developed in China.

They rose up as a substitute for airsoft and foam dart guns. The popularity of gel blasters exploded in areas such as Malaysia, where airsoft-unfriendly laws prevailed.

Over the last few years there was maximum growth of gel blasters and gel blasting in Australia ‘s two prominent regions; named as South Australia and Queensland.

Prior to this gel balls were not considered ammunition and were being widely sold in commercial and household stores.

Instead, ACCC ASN/NZ 8124 classified gel blasters as legal toys for use and sale.

However, the Australian Border Force once conducted seizures on Armored Heaven’s Brad Towner, Tactical Edge’s Peter Clarke toy.

In addition, people from out of state were traveling into Queensland to buy gel blasters. But that were not legal in their own state.

Because of the realistic nature of the gel blaster, they can be easily mistaken as a real gun.

South Australia and Queensland soon had several criminal cases against people using gel blasters on pedestrians and the general public.

This might explain the strict legality surrounding gel blasters today.

RoboMaster S1, a famous ground drone by DJI, was banned while being imported to Australia, as the package contained a gel blaster.

Even today, RoboMaster S1 is not allowed to be sold in New South Wales and Victoria.

Is Gel Blasting Legal In All States?

SAPOL (South Australian Police), in October 2020, officially declared gel blasters as regulated imitation firearms, putting its possession and sale under the regulatory acts such as Firearms Regulations 2015 and 2017.

In addition, it was declared mandatory for every person to have the certification and Category. A firearm license within an amnesty period of 6 months, which commenced from October 8, 2020, and lasted till April 7, 2021.

Within those six months, if any person is unable to obtain either the license or the certification, then he/she needs to submit the unauthorized “gel blasters possessed by them ” either to a legal firearms dealer or a police station.

That effectively ended gel blasting in South Australia. All the appeals to loosen the laws and make them less stringent were ultimately rejected by the State Government.

These new regulations led to numerous protests. Queensland remained the only state in Australia where a person can use gel blasters without a license.

On jolly 3, 2021 Gel blasters were banned in Western Australia , as the realistic gel blasters are often mistaken to be real guns.

As per the law if a person is found with gel blasters in the provinces of Western Australia, he will face significant time in jail followed by a fine ranging up to $36,000.

As of December 2021, Queensland is the only state that you can own a gel blaster without applying for a license or registering the gun.

The only condition is that you have to store and transport it concealed so as not to alarm the public.

Gel Blaster Laws In Tasmania

Gel blasters are realistic-looking replicas of real guns and can be used to mislead or threaten the public.

Cases of criminals using these guns for crimes climbed. The Firearms Act 1996 of Tasmania includes strict guidelines and rules against mimic weapons.

In August 2020, the Tasmanian Police deemed a gel blaster a firearm, banned all games, and called for the surrender of all blasters.

The government mentioned that if the gel blaster completely replicates the appearance of real firearms, then the person needs to inform the government and obtain a legal license.

A proper serial number and categorization are required for the same, in the case of gel blasters.

Gel Blaster Laws In Queensland

According to Section 67, the acquisition or possession of a restricted item is prohibited and illegal in the absence of any reasonable excuse. If someone fails to comply with it, the person would be charged with 10 penalty units ($1,334.50).

The amended February 2021 laws regarding gel blasters in Queensland state.

Gel blasters are the replica of firearms and aren’t categorized under any kind of weapon or firearm.

These replica firearms need not be registered, and the person owning it doesn’t need a license. Yay!

Possession and acquisition by legitimate retail outlets or members of a gel ball club are considered reasonable.

These are a few easy stipulations. The new amendments state that when a person isn’t using gel blasters, he/she can store it safely in a box or cupboard.

According to Section 142, the gel blaster has to be stored and transported in a locked container in such a way that it is out of sight of the public. A safe place to store or transport a gel blaster can be a car boot.

Gel Blaster Laws In Western Australia

Some recent incidents with gel blasters provoked a critical police reaction.

In 2020, officers were called to 147 gel blaster incidents while a pharmacy was held up with a toy gun, resulting in a police operation that lasted hours.

Police also obtained intelligence that criminal organizations were importing gel blasters and modifying them to turn them into workable weapons.

In addition, there was significant concern that someone holding a gel blaster would be mistakenly shot by the police.

The government passed the Weapons Act in July 2021, effectively banning gel blasters and calling for the surrender of all existing blasters.

Anyone found guilty will have a fine of up to $36,000 or face three years in prison.

Of course, this sparked an outcry of dissatisfaction from gel blasting enthusiasts.

Understandably so, why should a huge group of healthy, fun-loving players get their favorite pastime taken away because of the acts of criminals and irresponsible players?

Police Minister Paul Papalia is staunchly against gel blasters. He said that gel blasting was a “tragedy waiting to happen”. Because police officers were incapable of spotting the difference between a blaster and a real gun.

Gel Blaster Laws In New South Wales

You need a license in New South Wales to own a blaster.

Blasters and BB guns, although considered toys are actually imitation firearms because of their firing mechanism.

The law doesn’t differentiate between gel blasters, air rifles and any other gun that is considered an imitation firearm.

A person acquiring or possessing either any kind of firearm or imitation firearm must carry a valid license.

According to the Firearms Act, if a person acquires or possesses any kind of firearms without authorization, he/she is liable to a fine of up to $5,500 and imprisonment ranging from 5 to 14 years.

Gel Blaster Laws In Victoria

Due to the spike in home invasions and armed robberies, gel blasters are permitted only in Victoria with a valid collectors permit.

You’ll need to join an approved participating club or re-enactment club that deals with imitation weapons.

In Victoria, multiple cases were reported regarding the usage of a gel blaster to commit a serious crime.

Police Superintendent Dan Trimble said that many blasters replicated military-style weapons and were difficult to tell from the real thing.

He said that the blasters were used to commit serious crimes like home invasions, armed robberies, sieges, assaults, and drive-by shootings.

In January 2021, Southern Cross Station in Melbourne’s Central Business District was locked down after a man was spotted with a gel blaster.

After he was arrested, the police discovered the gel blaster and described it as “almost identical” to a real gun.

In September 2021, gel blasters were effectively banned.

Penalties for possessing or using a gel blaster.

Two years imprisonment and up to 10 years for someone with a criminal record.

If a person carries a gel blaster unconcealed to the public, he is liable to up to 2 years in jail.

Pointing a gel blaster at another person with prior permission will nab you up to 7 years in jail. Yikes.

Gel Blaster Laws In South Australia

You need to have a license for using gel blaster and the registration certificate of your gel blaster.

Before October 2020, a person could freely use gel blasters in South Australia without the need for a license.

However, in October 2020, gel blasters started being recognized as imitation firearms.

In October 2020, gel blasters were categorized as regulated imitation firearms in South Australia, and subject to the control, license, and requirements under the Firearms Acts of 2015 and the Firearms Regulations of 2017.

According to updated laws, although gel blasters are legal and can be acquired and possessed in South Australia, a person needs a license.

Gel blasters are now categorized as under-regulated imitation firearms. Every aspect of the blaster, starting right from the purchase, is under the control and regulations of the South Australian Firearms Act.

You cannot own a gel blaster in South Australia without a valid firearm license. In addition, the blaster must also have legal registration documents.

South Australian residents were given a 6 month amnesty period to surrender their guns to a police station, or apply for the relevant permits.

By then, gel blasters had become a popular sport, with over 60,000 estimated blasters in South Australia alone.

South Australian Police (SAPOL)

The South Australian Police (SAPOL) directed all owners to surrender the guns or apply for the necessary licenses.

You’ll need to fill up the PD303 Application Form and submit it to the local police station with an application fee of $100 and 100 identification points.

After this, you need to wait until the approval letter asking you to undergo a TAFE course arrives. The course is for 3 hours and costs about $55.

Once done, your instructor will post the results to SAPOL.

Then, you’ll have to wait for your data card to come from the Firearms Branch and take a photo with 100 points of original identification.

An interim license will be issued once your photo has been taken, and will be valid until the photo license is issued, or for up to 90 days.

In addition, you’ll have to register your gel blaster and have a serial number imprinted.

To register your gel blaster, you have to fill the PD306 Application Form and submit it for review to the police station.

After processing, the application form along with the serial number of the firearm and approval details, will be returned.

Once returned, the serial number must be engraved on the gel blaster.

You’ll have to report to the police along with the gel blaster and the form within 14 days with a registration fee of $40.

SAPOL Firearms Branch will then send you the registration certificate within a few days.

Congratulations! You are now free to possess and use the gel blaster at designated arenas, clubs, or fields.

Blog created and optimized by: The Digital Guruz, SEO Experts and a Joshua James Digital partner, offering SEO consulting services across the entire USA. 

Posted on by — Leave a comment

How To Get Started Gel Blasting Part 3 – The Battlefield

Gel Blasting

Now you’ve got your gel blaster, a couple of gel balls and some safety goggles, it’s time to go looking for a game!

Gel blasting battlefields

You can contact a gel blasting field in your area to find out when they have open slots.

A gel balling arena is a great place to meet fellow gel blasters and make new friends that share your love for the sport.

There are gel blasting battlefields scattered throughout Queensland.

Be sure to book in advance and check on any legal requirement in your area.

Most fields will have rental equipment, different gel blasters, unlimited pre soaked gel balls, and protective gear.

Renting a blaster is a good way to try out different types of gel blasters even if you have your own.

That way you can find out if a certain gel blaster is a good fit for you for a future purchase.

A session in a gel blasting arena is typically 3 to 4 hours and will cost you 25 to 40 dollars without rentals.

Renting a gel blaster for a session will set you back about 20 to 30 dollars.

What can I expect to play in a Gel Blasting field?

It depends on the field, but common game types are:

  • team deathmatch
  • capture the flag
  • search and destroy
  • defend the fort

A hot favorite these days is Battle Royale PUBG style. However, this style of play requires a large area and lots of preparation. It has to be planned more carefully than other easy-to-arrange types.

Team Deathmatch

The most common game style, players are divided into two teams.

The teams start out separated in a base.

The game has a few variations, the most common is time-based, you count the kills and every time someone gets shot they have to go back to the respawn area, which may or may not be the base.

The team that has the most hits when the timer runs out wins. The game can also be played without respawn until there is only one team left.

Team deathmatch with respawns is a perfect game for a beginner since it gives you a lot of action in a short time.

It can also be played in various types of gel balling fields, from really fast indoor close quarter combat (CQB) arenas to open air fields with heaps of space.

If you play indoors, a submachine gun (SMG) is a good choice of weapon. If you play on an open field you might want an assault rifle, possibly with an SMG or a handgun as a secondary weapon.

Capture The Flag

A traditionally outdoor game that is sometimes played inside, although it requires quite a lot of space.

In capture the flag the teams start out in opposing bases that have a removable flag inside. The goal is to grab the enemy flag and bring it to your home base without the enemy getting hold of your flag.

The flag will be heavily guarded so you aren’t likely to simply charge in there and grab it.

The game ends when the flag is captured and brought into the enemy base.

Capture the flag is a bit more complicated than deathmatch and adds a nice adrenaline rush when you are sneaking into the enemy base to grab their precious flag.

Choosing a weapon is somewhat depending on what position you have. If you are going to be sneaking into the enemy base a short assault rifle (CQB style) or an SMG would be the choice.

If you are defending the home base or laying down cover fire for the ones going for the enemy flag, a full-sized assault rifle or a light machine gun is a better choice.

Defend The Fort

Defend the fort, or attack and defend as it is also called, is best played in a big outdoors area, although it is possible as well in a spacious indoor setting.

The players are divided into two teams, one is the defending team and the other one is the attacking team.

The defending team will be in a fort or some other defensible position, while the attackers are, well, attacking.

The goal is to, within a set time limit, either kill off all the defenders by shooting them, or manage to get a “bomb” into the fort.

The defenders are usually not allowed to leave the fort, unless killed, but there are variations, some will have respawn, some not, some won’t let the attackers into the fort except for planting the “bomb”.

Attack and defend is a good opportunity for a newbie to get to know the equipment. The defensive part requires a lot of shooting, ducking and reloading.

If you play the attacking side you’ll have to be quick on your feet, so use a submachine gun or a CQB-style rifle.

For the defenders, something with a decent accuracy and preferably a big magazine. A M249 light machine gun would be a nice one to have there with its 1000 rounds mag.

VIP Protection

The VIP protection game is best played outdoors.

The players are divided into two teams; the good guys and the baddies. The baddies team usually has more players than the good guys team.

The good guys select one player to be the VIP and the rest of the team act as bodyguards. The goal is to get the VIP to a designated location without getting the VIP shot within a set time limit.

The game ends in one of four ways. The good guys win if the VIP makes it to the location in time or all the baddies are dead. The baddies win if the VIP does not make it in time or the VIP is dead.

The choice of weapon depends on the layout of the playing field. A safe bet would be an assault rifle with SMG as a secondary weapon.

Predator vs Prey

Predator versus Prey is basically like hide and seek with gel blasters. It is best played in an outdoor setting.

The players are divided into two teams; predators and prey. The game starts with giving the prey time to go and hide somewhere in the playing field. After the time is up, just like in hide and seek, the predators go hunting.

If a predator gets a hit on a prey, that prey turns into a predator. If a prey hits a predator, that predator is eliminated from the game.

Starting out like a good ol’ fashioned game of hide and seek, team Prey goes and spreads around, hiding.

While the predators go hunting, they have to proceed with caution as the prey can attack them just the same.

If a predator gets hit by a prey, he or she will be eliminated.

However, if the prey gets hit by a predator, they turn into one!

The game is finished when either team is out of players.

For this game an assault rifle with an SMG or a handgun as a secondary weapon is the best choice.

PUBG Battle Royale

PUBG battle royale is a different style of game that requires a lot of setup from the field, so it is not a very common event.

The hugely popular game PUBG is available on desktop and mobile, with hundreds of millions people playing it. It starts out with the player parachuting out of a plane with no equipment.

Upon landing you have to find weapons, ammunition and other things like backpack, grenades, painkillers and so on.

It is played with teams of 1, 2 or 4 persons. The goal is to be the last team standing. The playing field is constantly shrinking, until only a few players are left.

The gel blasting version of PUBG is based on the part where you start with no equipment. Too bad, there’s no jumping out of planes!

The first thing you do is go find weapons and ammunition.

The field will have plenty of guns and ammo that has been prepared for you to find.

Be cautious if you see a really awesome gun lying around in the open; it may be a trap with a nearby sniper!

After you locate equipment and are all geared up, it is basically standard deathmatch, except you have no refill of ammo unless you find a mag that fits the gun you are currently holding.

The winner is the team that still has an active player alive when all others are gone.

PUBG gel blasting has to be played in a big area with at least 8-10 people to keep it interesting.

The uncertainty of what type of equipment you will find is the fun part of the game. Any PUBG player knows what it’s like to finally find a kickass gun!

Blog created and optimized by: The Digital Guruz, Boutique SEO Agency a Joshua James Digital partner, offering SEO consulting services across the entire USA. 

Posted on by — Leave a comment

How To Get Started Gel Blasting Part 2 – Equipment

Gel-Blasting

Gel blasting is an awesome, fun way to spend a couple of hours running around and shooting up friends.

It is a simple game to gear up for. You’ll need a gel blaster, eye protection, and as many gel balls as you can get!

While skilled players may want to invest in extra gear, that’s all you’ll need to get started.

Gel Blaster

You can find various types of gel blasters online like assault rifles, submachine guns and handguns.

You will get a pair of safety goggles and a pack of gel balls when you buy a new blaster.

The googles will be of inferior quality, so getting some separately might be a good idea.

While some local providers include some lovely gel balls to get you started, the majority of the gel balls are of inferior quality. Gel balls are affordable and easily available online.

A decent pair of goggles should come in the box when you spend 200 to 300 dollars or more on a gel blaster.

It makes sense when you buy your next gun since the cost of the googles will be reflected on the price of the gun. No reason to pay for premium googles again since you already got them.

Safety goggles

You can use the included goggles for some practice shooting at home.

However, if you’re in a game or if you’re going to get shot, you should obtain something better

You can pop into Bunnings and get a pair of safety glasses for work, or you can go online and get a pair of shatter resistant goggles.

Gel Balls

A few times a year, the merchant may throw in a bag or two of decent gel balls so you can begin games right away. Normally, the gel balls that come with the blasters are horrible, so don’t waste your time using them.

Gel balls are really cheap; you get a bag with 10,000 Warinterest Hardest Red Gel Balls for about $10.

Gel balls are made of a substance called SAP (Super Absorbent Polymer) and they are sometimes called gellets, water beads, water crystals or some other name that make less sense than gel balls.

The gel balls are really tiny when you get them, but after soaking them in water for 4-5 hours, they grow up to 200 times into a 7-8mm diameter ball, containing 95-98% water.

The soaking gel balls are mostly water with a small amount of biodegradable starch. They will disintegrate upon impact and disappear in no time if left outside after a battle.

They are non-toxic, so if you miss a few after cleaning up, there is no risk of poisoning any pets or wild animals.

Useful Stuff

To get started, you only need a gel blaster, safety goggles, and gel balls. However, other accessories are likely to improve your blasting experience.

Face protection

Getting shot in the face at close range in a Close Quarter Battle can be a bit painful.

By using a full-face mask, you can avoid the agony and avoid getting drenched in sweat. Because this is gel blasting, a simple mesh mask protects you from discomfort while allowing you to breathe freely and avoid sweating profusely. You can find a mesh mask here.

Hat

While you sweat, a hat prevents you from getting tanned and sunscreen from irritating your eyes.

A good-looking hat is of course always good to have, even if you are indoors. Even when being shot at, you should look your best!

Clothes

Intense outdoor games can involve running, jumping, crawling and climbing.

Since most injuries in gel blasting come from twisting your ankle, a couple of nice boots with ankle protection can be useful in intense outdoor games.

Long pants and sleeves can help protect your skin from nicks and abrasions as well as minimize the impact of a gel ball.

Upgrade your gel blaster

Depending on what blaster you have, there are some easy upgrades to enhance the performance.

Some of the more expensive blasters have decent parts in them right out of the box, but most can do with some basic upgrades.

Barrel

Many gel blasters come with a plastic inner barrel. An easy way to improve the accuracy and the speed of the gel ball is to change the plastic barrel to a metal one.

A barrel replacement will most probably require a new t-piece. A t-shaped plastic component, usually glued to the barrel, feeds the gel ball into position in the barrel.

Hop-up

Adding a hop-up will improve the accuracy of your blaster. It sits in the end of the barrel and its purpose is to give the gel ball a back spin when it exits the barrel.

If you have a metal barrel you can easily add a hop-up.

Spring

If you want your gel balls to leave the blaster at a higher velocity, you can change the spring to a stronger one.

If you want a really powerful spring you will have to look at upgrading the battery and possibly the gears.

Battery

Most blasters have a 7.4 volt battery out of the box. An easy way to increase the rate of fire is to get a 11.1 volt battery.

An 11.1 volt battery is also good to have if you have upgraded your spring.

Gears

Nylon gears are the standard on most blasters and they work just fine. If you have upgraded the spring and the battery they might not be able to keep up with the added stress and start to deteriorate.

You can upgrade the blaster with metal gears; they are way stronger and can take the added stress.

Time to go blasting!

There you go, all set with a gel blaster, gel balls and safety goggles and possibly some useful equipment. Now it is time to find someone to shoot at.

The easiest way is to find a couple of buddies and go shooting in someone’s backyard. Just be sure to tell your neighbours what you are up to and remember to always keep your guns in a bag or a box when you transport them.

No need to freak someone out and have them call the cops on you.

When you’re done blasting you should always empty out the mag and the receiver to avoid problems with gel balls drying out and getting stuck in bad places.

The battery should also be removed and charged. Don’t leave the battery in direct sunlight, and monitor the charging. It can be damaged in the field and can overheat.

Even better than shooting up a couple of friends in some backyard is to shoot up heaps of friends in a battlefield. More on that to come!

Blog created and optimized by: The Digital Guruz, ECommerce SEO Agency and a Joshua James Digital partner, offering SEO consulting services across the entire USA. 

Posted on by — Leave a comment

Top Gel Blaster Assault Rifles

Assault Rifles

The assault rifles first came about in the second world war, but the widespread use in the military didn’t really happen until late in the 20th century.

Today, almost all armies use assault rifles as a standard piece of equipment.

The switch from the more powerful, high precision rifles, came after the realization that most combat takes place within 400 meters of the enemy.

By decreasing the size and weight of the equipment, the soldiers can carry more ammunition and engage in a style of combat where you rarely see the opposing forces.

Here are some of the best gel blaster versions of widely-used assault rifles available today.

Tar-21 by Ares

This is probably the most solidly built gel blaster in the market at the moment, based on a strong polymer body with metal parts.

The bullpup design with the magazine behind the trigger moves the main weight of the gun closer to the body, and may not be for everyone.

While not the most standard looking gun, it all is a matter of personal preference.

The bullpup has the advantage of a long inner barrel in a short gun.

The Tar-21 sports an inner barrel about 40 cm long in a 68 cm construction.

This can be compared to the MP5 that is about the same length but has a 20 cm inner barrel.

The short, dextrous design of the TAR-21, combined with the precision you get from a long barrel, makes it suitable for both CQB and longer range style games.

The Tar-21 has a rate of fire at around 12 rounds per second, which can be increased by changing the included 7.4 volt battery to an 11.1 volt.

Out of the box, the Tar-21 fires a gel ball at about 260 feet per second, but it can easily go way above 300 FPS with a simple and affordable spring upgrade.

Some key features of the Tar-21 by Ares

  • Bullpup constructions
  • Ambidextrous mag release
  • Magprimer
  • 2 metal mags included
  • Silver cables
  • Inline gearbox
  • Metal gears
  • Metal 20mm accessory rails
  • Strong polymer construction
  • Superior build quality
  • Consistent FPS
  • Easy spring change
  • Inner barrel Metal
  • Metal outer barrel
  • Metal mag x 2

The polymer Tar-21 from Ares is one of a kind with its super strong body and high quality components.

As always, you pay for quality, and the Tar-21 can be worth up to $800. You can order the Tar-21 right here.

Assault Rifles – SCAR-L Metal by CYMA

This Metal SCAR-L (Special Operation Forces Combat Assault Rifles) from CYMA is a metal/polymer build.

Just like the original rifle it mimics, the upper part is full metal and the lower part is a polymer.

CYMA is one of the oldest and most trusted companies in the toy gun business, they have been operating for over 20 years, and have hundreds of employees.

It performs well right out of the box, with a velocity above 300 feet per second and up to 20 rounds per second on full auto fire.

The range is up to 25 meters, depending on what type of gel balls you feed it. At the end of the metal outer barrel is a 14 mm counter clockwise thread for attachments like a hop up.

The metal SCAR has its weight well distributed, although it is quite heavy for a gel blaster weighing in at just over 4 kilograms.

The boot shaped buttstock is expandable for a perfect fit, and it can be fully folded to the right side for ease of transport.

There are four 20 mm accessory rails on the rifle, with the top one is the full length of the metal upper receiver.

Some key features of the SCAR-L by CYMA

  • Ambidextrous fire selector
  • Ambidextrous mag release
  • Mag primer
  • Solid build of metal and strong polymer
  • V2 Metal gearbox 18:1 with metal gears
  • High velocity, up to 320 feet per second
  • High rate of fire, up to 20 rounds per second
  • Metal inner barrel
  • Metal outer barrel
  • 11.1 volt battery
  • 51 cm inner barrel with inner diameter 7.4 mm

The Metal SCAR-L by CYMA is in the price range of $500 to 600 and is available in a tan model and a black model.

Assault Rifles – SLR CQB by JingJi

This SLR CQB blaster from JingJi is a solid nylon construction, with a weight of about 1.5 kilograms.

It has a unique buttstock with an SBPDW pistol stabilizing brace so it can be strapped to your lower arm.

It is 61 cm long with the stock retracted and 67 cm with the stock fully extended.

The blaster shoots decently out of the box, with a velocity around 250 feet per second at a rate of about 15 rounds per second on full auto.

You can expect it to be accurate at a distance of up to 20 meters without any modifications.

Being an M4 style blaster, and one of the more common guns in the last year or so, you can find all sorts of accessories for customization.

Most of the components in this rifle are standardized, making it a breeze to upgrade it for higher performance.

There are three models available in black, tan, and green.

They are basically the same except that the green one comes with metal gears and an 11.1 volt battery, while the black and tan ones come with nylon gears and a 7.4 volt battery.

Some key features of the SLR CQB by JingJi

  • Solid nylon construction
  • Great compatibility for magazines
  • SBPDW pistol stabilizing stock
  • Metal gears (green model only)
  • Metal mag release
  • Clear mag viewing window
  • Ambidextrous metal mag primer
  • 21 cm long metal inner barrel, 7.5 mm inner diameter
  • Knurled outer barrel of metal
  • Full length tactical rail on top
  • Compatible with LDT tracer magazines
  • Compatible with Gen 9 magazines

A bit of a household blaster in the $300 to 400 price range, the JingJi SLR is a reliable workhorse that is easy to customize and upgrade.

You can choose from the Black SLR, the Tan SLR and the Green SLR.

If you are tired of constantly reloading, you can add a drum mag that will hold around 500 rounds of ammo.

Blog created and optimised by: The Digital Guruz, Professional SEO Services a partner of Joshua James Digital, a California-based SEO agency.

Posted on by — Leave a comment

Top Gel Blaster Guns: Shotguns, Handguns, and Sniper Rifles

gel blaster guns

While the most common gel blaster guns are assault rifles and submachine guns, we’ll take a look at the lesser known unsung heroes of the gel blasting world: the shotgun, handgun, and sniper rifle.

The Shotgun

A shotgun is a relatively short ranged weapon traditionally used by the point-man; the first person to charge into a room.

M97 by Hanke – Gel blaster guns

The M79 shotgun from Hanke is a solid nylon build that fires in single or buckshot mode. It is entirely manual, requiring no batteries or gas.

The hopper holds the gel balls while the pump action powers the shots. While the internal hopper holds about 20 rounds, you can add an external hopper that holds another 80 gel balls.

The pump action shoots your gel balls at surprisingly high velocity at around 300 feet per second in single shot mode.

Switching between single rounds and buckshots is as easy as tipping the gun forward and pausing a little with the pump handle in a far back position, leaving some time for the gel balls to get in.

Some key features of the M97 by Hanke

  • Strong nylon build
  • Easy buckshots, with 5-6 rounds
  • Metal barrel
  • 20 gel balls internally
  • 80 gel balls in external hopper
  • Up to 300 FPS

With a 30cm and 7mm diameter metal barrel, the shotgun is excellent at close range of up to 25 meters. You can find the M97 here and at a very affordable $100.

Handguns

A handgun is primarily used to back up the main weapon. If you’re cornered and have run out of ammunition, pulling out a handgun and firing is way faster than reloading the main weapon.

In addition, snipers often carry a backup handgun should they be chanced upon by any unsuspecting members of the opposing team.

Glock G34 by Double Bell – Gel Blaster Guns

Catapulted into the limelight, the Glock G34 used by John Wick in the second chapter is a high quality, light, handgun powered by green or top gas.

With a metal slide at the top and a nylon bottom, it fires gel balls with high precision at a speed of about 300 feet per second.

The G34 has both outer and inner barrels made of metal.

The inner barrel is 7.5mm in diameter, has a built-in hop up and ends in a 12 mm counter clockwise thread.

The firing mode is semi auto only, and the magazine holds 15 rounds.

Some key features of the Glock G34 by Double Bell

  • Superior build quality
  • 12mm counter clockwise thread
  • Outer and inner metal barrels
  • Integrated metal hop up
  • Gas blowback
  • Green gas/top gas
  • Up to 300 feet per second

The John Wick 2 Glock G34 is one of the most solid and reliable gel blaster pistols available.

A top quality handgun, it is priced higher than its cheaper counterparts, and you can order it right here.

Beretta 90TWO by SKD

This excellent battery powered handgun has a unique feature; it comes with a flashlight which is also a 7.4 volt battery. The flashlight can be connected in series with the built-in battery, delivering a total of 14.8 volts.

The build of the Beretta is high quality nylon with a built-in rechargeable lithium battery. The flashlight also has a built-in battery and has to be charged separately.

A single button controls the mag primer and fire mode selector; a quick press switches mode between single shot and full auto, and a long press primes the magazine.

You’ll be able to get a firing rate of 10 rounds per second travelling at 145 feet per second in the 14.8 volt mode. This rate will empty out the mag in about four to five seconds on full auto mode.

Some key features of the Beretta 90two by SKD

  • High rate of fire with 14.8 volt
  • Mag primer
  • Single shot and full auto
  • Flashlight and battery included
  • Blow-back feature
  • Fast trigger response
  • Hop up is available

If you are looking for a reasonably priced sidearm or small secondary weapon, you can’t go wrong with the Beretta 90two. It is available here for $120.

Sniper Rifles

The word “sniper” comes from a group of 26 birds from the Snipe family. These birds are highly alert and easily startled, rarely remaining in the open.

The bird’s erratic flight patterns also added to the difficulties hunting them.

The challenges faced while hunting these nervous birds gave rise to the term “sniper”.

Sniper emerged as a noun in the 1770s and now refers to the hunting prowess of skilled sharpshooters making shots from concealment or camouflage.

Kar 98 by Double Bell

The Rolls-Royce of sniper rifles, the Kar 98 by Double Bell is a gas-powered piece of art with a stock and body on a solid piece of wood.

While a small wooden fitting in the front is needed for assembly and disassembly, the Kar 98 shares the bolt action of the original Mauser Kar 98.

This gel blaster is gas-powered with five shells loaded with one gel ball each pressed into the mag.

Pulling the bolt back grabs the previous shell to eject it, lining the next one up.

Pushing the bolt forward loads the shell into the barrel, ready to fire.

The inner and outer barrels are metal; the inner barrel has a diameter of 7.35 mm and is 50 cm long.

This amazing rifle fires gel rounds at more than 400 feet per second and is accurate at up to 35 meters out of the box.

Some key features of the Kar 98 by Double Bell

  • Superior build quality
  • High velocity, more than 400 feet per second
  • Accurate at up to 35 meters
  • Metal barrels
  • Butt stock and stock is one piece of real wood
  • All metal construction
  • Can take both CO2 and green gas

The Kar 98 has amazing handicraft and build quality in addition to the high power and accuracy so needed for a sniper.

You can order this gel blaster guns amazing rifle right here at $585.

Blog created and optimised by: The Digital Guruz, Professional SEO Services and a Joshua James Digital partner, B2B SEO experts.

Posted on by — Leave a comment

Best Submachine Gun Gel Blasters

Gun Gel Blasters

Gun Gel Blasters – A submachine gun, or SMG, is a small machine gun suited for use in cramped or confined spaces.

They are the scary looking automatic weapons used primarily by special forces, anti-terrorist units, and police.

In addition, they are used in defending military units in plants, boats, and other transport vehicles.

Close Quarter Combat or CQB is where the SMGs shine. Here are our favorite SMGs, in no particular order, that have a high bang for the buck.

MP5 Deluxe by LDT/Warinterest

The latest MP5 from LTD is a very solid build that ships with metal gears. It is 68 cm with the standard stock and has a metal outer barrel and a metal alloy inner barrel with a diameter of 7.3mm.

The inner barrel is just under 20cm long, which is long enough to be accurate at 20-25 meters, but short enough to make the MP5 perfect for the much needed agility in CQB games.

The LTD/Warinterest MP5 combines a high out of the box rate of fire, powered by an 11.1 volt high capacity battery.

With a rate of fire at about 19 rounds per second and a drum magazine holding about 300 gel balls, this MP5 is some serious firepower in a small package.

This in addition to its great looks and build quality has made this MP5 the favourite gun gel blasters for many players, perfect for all situations that may occur in CQB.

Some key features of the MP5 by LTD/Warinterest

  • 14mm Reverse Threaded Tip for easy attachments
  • Ambidextrous fire selector
  • 1.2mm spring
  • Gearbox V2 version 3.0
  • Metal gears, ratio 18:1
  • Silver wiring
  • USB chargeable, high capacity 11.1v battery
  • Carrying bag included
  • Quick release mag with dual levers
  • In-barrel hop up
  • Cool upgrades are available

The LTD MP5 is one of the best built and best performing SMGs you can get in the price range of around $350. Take a look at the LTD MP5 here.

ARP9 by XYL

The compact ARP9 is only 50 cm long when the stock is collapsed fully, and 59 cm when fully extended.

This well-built gun gel blasters comes with a simple MOSFET as a standard, supporting semi and fully automatic with an auto brake function.

After a round is shot in the semi mode, the battery polarity is temporarily reversed, which stops the motor immediately.

Its small size and auto break MOSFET makes it a popular choice for speedsoft.

It comes with a 13 cm alloy inner barrel, nylon outer barrel with 14 mm counter clockwise threaded tip, and four 20mm rails on all sides for accessories.

Firing speed is up to 250 feet per second and about 20 rounds per second.

The gearbox is nylon with 8mm bushings and a full set of metal gears and is powered by a 7.4v battery and a vented case 480 motor.

The ARP9 comes with many metal details like the fire selector and the trigger. You find the mag primer placed in the back of the top accessory rail for easy access.

Some key features of the ARP9 by XYL

  • 20mm rails on 4 sides for accessories
  • Metal alloy inner barrel
  • Gearbox with high quality 8mm bushings
  • Stainless steel cylinder
  • 18:1 metal gears
  • Foldable stock
  • Mag primer
  • MOSFET with Active Braking
  • Drum mag available

XYL’s ARP9 is a perfect SMG for speed soft and fast CQB’s around the $350 price range, check it out here.

Vector v2 by LeHui

The Kriss Vector V2 has a sturdy full nylon construction with great attention to detail.

It has a mag primer on the left side, and the two fire mode selectors are ambidextrous. One mode for the on/off, and one for the MOSFET feature).

The stock folds easily and if you want to go AR style, get an adaptor so you can replace it with a buffer tube stock.

The MOSFET features three firing modes, semi automatic, three round burst, and fully automatic.

It comes with an 11.1 volt battery out of the box and has some extra accessories you wouldn’t normally see included like a laser sight and a flashlight.

The standard Vector V2 magazine holds about 150 gel balls, and if you want to get some more time before switching magazines, you can get a single drum magazine that holds about 800 rounds.

There is also even a double drum magazine that holds more than 1,000 gel balls.

The shape of the Vector V2 Gun Gel Blaster required developing an advanced non-standard gearbox with the cylinder and barrel at the same angle as you can see on the standard magazine and the barrel.

Although the clear gearbox is non-standard, it contains standard components, making it fairly easy to upgrade or replace individual parts.

The plastic barrel is 18 cm long and it has an inner diameter of 7.3 mm. The total length of the gun is 79 cm with the stock unfolded and 55.5 cm when folded. Out of the box, you can expect it to fire about 15 rounds per second at 220 FPS.

Some key features of the Vector V2

  • MOSFET with three firing modes, single, burst, and full auto.
  • 11.1 volt battery
  • Mag primer
  • Drum mag is available
  • Laser sight included
  • Flashlight included
  • Unique looks

The reliable and sturdy Vector V2 can be found right here for under $200.

P90 V3 by BingFeng

This SMG looks like something out of a sci-fi movie. It is sturdy full nylon construction, available in black and and a surprising pink. It has a sturdy, rigid, nylon body, with a 20 mm rail in the front top for accessories.

There is an ambidextrous safety switch located under the trigger.

There are also ambidextrous fake mag primers on both sides that do nothing else but move when you pull them. Fortunately, the mag is spring loaded and does not need a primer.

The included battery is 7.4 volt, but a 11.1 volt battery is a recommended and affordable upgrade.

The gearbox is a custom design for the P90, but standard parts make replacement or upgrading a breeze.

The P90 is a bullpup type of gun gel blaster, meaning that the action is happening behind the trigger.

The benefit of this is that you can have a longer barrel and get better accuracy in a small form factor.

At 50cm this is one of the shorter SMGs, yet still, it has a decent range. It comes with a metal alloy barrel and only fires full auto at 17 rounds/second and 200 FPS.

Some key features of the P90 V3

  • Mag holds 200 rounds
  • Unique looks
  • Sturdy, high quality nylon build
  • Bull-pup type of gun gel blaster
  • Top and side rails for accessories

To sum it up, the P90 from BingFeng has great out of the box performance that can easily be increased with simple upgrades. It is available right here for under $150!

Blog created and optimised by: The Digital Guruz, Professional SEO Services

Posted on by — Leave a comment

Why Is Gel Blasting Better Than Say….Paintball or Airsoft?

Gel-Blasting

Gel Blasting – As far as Close Quarter Battle (CQB) games go, most folks know of paintball, the dominant player for many decades.

Some might also know of airsoft guns, Japan’s answer to the popularity of paintball.

But, gel blasting? What’s that now?

A relatively new player in the CQB arena, gel blasting has only been gaining traction in the last few years. Also known as gel balling, blasting involves trying to eliminate members of the opposing team by hitting them with many little projectiles called gel balls.

While paintball and airsoft gun pellets can hurt, gel blasting is much more forgiving. The mostly water-based gel balls disintegrate on impact, causing little to no pain.

Gel Blasting Is More Eco-Friendly

Small 7 to 8 mm gel balls are used for ammunition that explode on impact, causing little to no pain.

The ball is composed of sodium polyacrylate, a very absorbent polymer expands 200 to 300 times when properly wet.

It is a safe, non-toxic, biodegradable compound made up of 98% water, leaving water and biodegradable gel as residue.

Crystal soil, orbeez, or water beads are widely used as ornamentation in flower vases or in the hands of children playing, are made from the gel ball material.

The spent ammo left on the ground in nature after a good game out fighting baddies with your friends will soon decompose. Despite this, it would be a responsible thing to clean up after yourself.

Since the gel ball is mostly water and a small amount of biodegradable material, you can even fire a gel blaster gun at home or indoors without making too much of a mess to clean.

While gel balls come in unsoaked pellets, soaking them causes them to expand between 200 and 300 times.

Unsoaked gel balls should not be left unattended near children or pets because of its capacity to expand.

If a pellet finds itself into a kid’s tummy, ear, or nose and comes into contact with water, it could potentially cause some discomfort or pain.

In contrast, airsoft ammunition uses two types of 6mm plastic pellets; the ABS plastic or PLA plastic.

PLA plastic takes about a year to decompose but BS plastic does not decompose and has to be removed from the environment.

Gelatin is used to make the outer layer of paintball ammunition. While good quality paintballs are fully biodegradable, some inferior quality paintballs are not.

There have also been reports of dogs being sick from eating paintballs, although the amount ingested was unclear. (Source)

Gel Blasting Is Cheaper

In addition to being less painful and kinder to the environment, gel blasting also happens to be more wallet-friendly than its other CQB counterparts.

The one time setup cost involves personal safety equipment and a decent gun. All the safety equipment you’ll need is a good pair of eye protection.

Running costs involved ammunition, entry fees into the gel blasting area, and any upkeep you might need on your gel blaster.

The setup cost is entirely dependent on your budget, priorities, and personal preferences. While airsoft guns are in a similar price range with gel blasters, paintball guns can cost up to double.

A typical entry-level paintball gun will cost around $300, while a ready-to-use gel blaster will cost less than $150.

In addition, you’ll need body protection for paintball. Paintball can attest to the excruciating pain.

All you really need in gel blasting is a decent pair of safety goggles. New gel blasters usually come with an average pair that might not suit you once you get more into the game. A pair of good safety goggles will cost about $10.

Ammunition costs vary greatly across CQB games and these costs rapidly add up if you are a trigger happy soldier.

Paintballs are the most expensive by far, followed by airsoft pellets, then the affordable gel balls.

A pack of 500 branded paintballs would cost between $20 and $30. For same amount, you can get about 4,000 to 5,000 of airsoft pellets.

In contrast, that amount spent on good quality gel blaster ammunition will snag you around 30.000 gel balls.

Gel Blasting Is Safer

Paintballs are 3 grams gel capsules packed with paint. It can travel at speeds of up to 250 feet per second when shot from a gun.

Anyone ever hit with a paintball can attest that it hurts!

If you are not wearing protective clothing or armour and are hit with a paintball in an unprotected area, you may develop a purple bruise that lasts for days. Paintball also necessitates the use of a full-face protective mask.

A typical airsoft ball is not as heavy as a paintball. They are plastic pellets about 6mm in diameter and weigh about 0.12 to 2 grams.

The plastic bullet is hard and will still hurt at close distances, drawing blood or knocking out a tooth.

Full face protection is not mandatory in airsoft games but always recommended.

In comparison, a gel ball is a larger 7 to 8 mm in diameter yet weighs a mere 0.2 grams. It has a biodegradable sodium polyacrylate skin soaked and swells approximately 200 to 300 times.

The gel ball contains 98% water and harmlessly explodes on impact.

Most guns shoot bullets that don’t leave or mark or cause any pain, especially if it hits thick clothing.

However, if shot by a high-powered rifle at close range, you might get a little red mark that might last a day or two.

It is nearly impossible to be seriously injured by a gel blaster until and unless the gel ball strikes you in the eye. Hence, eye protection is mandatory in all gel blasting games.

Give gel blasting a shot, and enjoy a safe, environmentally conscious way of shooting up some folks with friends!

Blog created and optimised by: The Digital Guruz, Professional SEO Services

Posted on by — Leave a comment

How to Get the Best Gel Blaster Gun?

gel blaster gun

Want to buy the gel blaster gun? If you’re a first-time gel blaster gun buyer, this buying process can be a little overwhelming. The craze for such gel blasters Australia has crossed all levels, and hence, people always look for the best way to grab the best gel blaster gun. To make things a little easier, we have come up with a guide to buying your favourite toy easily. From start to finish, you can learn the ideal ways that will help you find the best gel blaster gun and save a lot of time. So, pay attention to the points mentioned below-

First, Know Your Budget

Let’s first discuss the budget. We all know there is a wide range of gel blasters available at different prices. So, the first factor you should keep in mind while buying a gun is the budget. Right? Of course, yes, finding a new, full metal gel blaster gun at a very low price is impossible. So, face reality and consider these points while setting your budget-

  • Remember, descriptions always sound good.
  • Retailers always want to earn more and more profits.
  • One size doesn’t fit all. So, prioritise your preferences.

Decide On The Right Model

Once you know your budget, the next step is to determine the type of gel blaster gun you want. For this, you need to consider what game you will play, whether it is shotgunner, sniper, and rifleman. Once you figure it out, you can easily decide on the right model of gel blasters to invest in.

Check The Reviews

Now you have decided your budget and determined the model of gel blaster gum you will purchase. But before you buy the gun from the shop, make sure you have taken a tour of the reviews of the previous buyers. This way, you can easily determine that this purchase is worth the investment or not. End your search for a “gym blaster near me” with us as people love buying gel blasters from our online store.

Know the Type Of Play

It is important. You must check what type of games you can play with the gel ball gun you choose because the different types of games significantly impact the gun. So, determine if it is ideal for an adult or a child to play. After all, safety is a must!

Final Words

So, this is all about the ideal ways that can help you find the right gel blaster gun. Follow these steps, and we are sure you will end up with the right gun.

Blog created and optimised by: The Digital Guruz, Professional SEO Services

Posted on by — Leave a comment

A Guide To Assembling Your Own Gel Blaster

Gel Blaster Gun

You’re here because you’re thinking of getting into the fantastic world of Gel Blasting, the safest and most fun of the Close Quarters Battle (CQB) sports.

The selection of available Gel Blasting weapons is extensive, and there are a lot of them that not only look great but are also reasonably priced. There are handguns, assault rifles, shotguns, sniper rifles, submachine guns, and the list goes on.

When you buy a new Gel Blaster Gun, it is likely to come with some low-quality components. If you decide to get a pricier, top-of-the-line Gel Blaster, it will probably come with standard quality components. If you enjoy the game and want to improve your performance, there is an easy way.

Enter the land of upgrades, where you can change every individual component in your Gel Blaster into something better. Let’s explore the reasons and the parts needed to construct your very own Gel Blaster.

Four reasons to build your Gel Blaster

Building your own weapon allows for more control over your preferences.

Velocity – Increasing the speed of the Gel Ball gives better range and precision.

Firing speed – The more Gel Balls are in the air at once, the higher the chance of a successful attack.

Reliability – Higher quality components minimize the appalling thought of a part malfunctioning during a game.

Fun – Having fun is what Gel Blasting is all about!

Understanding how your weapon works is the first step to being a better player.

Having better-performing equipment will save you cost and effort in the long run, minimizing the need for service and repairs. It is NO fun when a gun malfunctions during a game!

Battery

Most Gel Blasters come with a 2 cell lithium-ion polymer battery that delivers 7.4 volts. Getting an 11.1-volt battery with three cells is an easy upgrade; simply switch to a new battery and get the matching charger.

Ensure the new battery fits in the battery compartment of your Gel Blaster; different Blasters use a wide range of batteries.

That extra voltage will make your motor run faster and also improve the torque. A high torque will be helpful when you do other upgrades.

Spring

The spring is a cheap and easy upgrade. Many Gel Blasters come with a gearbox outside which the spring is accessible.

The spring is fundamental in dictating speed and power. The harder the spring compresses, the more power it will eventually transfer when released, giving Gel Balls a higher velocity.

Springs come in many different types and strengths.

Long springs require more power and need to be compressed more than short ones.

Thick springs need more power to compress than thin springs.

In addition, the type of metal with which the spring is made makes a difference. Stiffer metals like carbon steel, a dark metal, are more rigid than stainless steel, requiring more compression power.

If you get a spring too hard for your motor, the motor will struggle with compression. In that case, a thinner or shorter spring would be ideal.

Springs are highly affordable. You can get a few springs of varying density, thickness, and length, gradually increase the stiffness until the motor gives up to get the maximum power.

Alternatively, upgrading the motor is an option. If upgrading the motor, be aware that most Gel Blasters out of the box come with nylon gears significantly weaker than metal gears. Nylon gears might struggle to deal with the increased stress, and you might need a gear upgrade.

O-Ring

The O-ring is located in the piston head and is the part that keeps the air compressed when the spring releases its accumulated power and pushes the piston forward in the cylinder.

The original O-ring is prone to leaking air and should be replaced by a high-quality one.

Switching out the O-ring is easily the cheapest upgrade that will make a significant performance improvement. The only downside is that you will have to disassemble the gearbox, or at least take off the top if you are lucky enough to have a split gearbox.

Barrel

Your Gel Blaster Gun most likely comes with a plastic barrel. A metal barrel has less friction and will increase the velocity of the Gel Ball.

If you decide to switch out the standard plastic barrel with a metal one, consider the balance between cylinder and barrel volume.

In addition, you will probably need to get a new t-piece, since most are glued onto the barrel.

Cylinder/Head/Nozzle/Piston/Tappet

These are the parts of the Blaster where the air is compressed and is prone to air leaks. An air leak would mean a drastic decrease in power and performance.

The cylinder is a metal tube where the air is compressed. There are full cylinders and ported cylinders.

A ported cylinder has a hole and will compress less air. The type of cylinder you will need depends on the volume of your barrel.

In the front end sits the cylinder head. It typically comes as a plastic or nylon piece with a single o-ring, and is easy to replace with a double metal o-ring.

There are also one-piece cylinder and head options that will eliminate the possibility of air leaks.

The nozzle sits at the end of the cylinder head and is pushed and pulled by the tappet. It positions the Gel Ball for the barrel.

To reduce any air leaks, a metal nozzle with o-rings works best. The nozzle and cylinder head typically come together but can also be bought separately.

Tappet

The tappet gets trapped by a pin on the sector gear and is pulled back for a short while, pushing the nozzle into the piston head. This action leaves a gap between the nozzle and the barrel in the t-piece, letting a Gel Ball pop into place.

The tappet will be released and pulled forward by a return spring while the piston is still being pulled back by the gears. This pushes the Gel Ball into the back of the barrel, preparing it to be fired when the gears release the piston.

The tappet is usually plastic in an off-the-shelf gun and should be replaced with nylon or metal if you’re seeking to improve your equipment’s fire rate.

The piston sits on the spring while the piston head is located at the front. The piston is the moving part responsible for keeping the air compressed while being pushed by the spring. In addition, it allows air to flow back when it is pulled back by gears.

A good airflow when pulled back makes it easier for the engine and will improve the rate of fire.

The piston has a ladder on the bottom where the gears connect to pull it back to compress the spring.

The piston ladder and the gears should be the same material to avoid additional stress on the ladder. It is recommended to change the ladder as well if you change your gears to metal.

T-piece

The t-piece is the tube that is located between the cylinder and barrel and connects to the magazine.

It takes your Gel Balls in and places them in position for getting shot out of the barrel. The t-piece may have to be changed if you change your barrel.

Why Pair The Barrel and Cylinder?

The volume of the cylinder and the barrel should be paired, so the compressed air spent is balanced just as the Gel Ball leaves the barrel. If the cylinder has too much volume, it may cause turbulence when the Gel Ball exits the barrel, affecting precision.

If the cylinder lacks volume, the force of the compressed air will be spent prematurely, affecting the range and precision of the Gel Ball. A reasonable ratio is a cylinder volume of approximately between 1.6x and 2x that of the barrel.

Hopup

A hopup sits at the end of the barrel and is used to get a backspin on the Gel Ball. A backspin on the exiting Gel Ball will significantly improve accuracy by straightening the trajectory.

Note that a hopup might prevent the use of a tracer unit, and you might have to choose between them both.

Bonus tip: Cover the hopup with a fake silencer to protect it from dirt or accidental knocks and bumps.

Gears

The gearbox has three different gears named after their shape.

The bevel gear connects to the motor and is beveled (or sloped) to fit the pinion gear on the motor.

The spur gear connects the bevel gear to the sector gear, which is the part that pulls the piston and tappet back.

You can choose gears in different ratios; the most common ones being 18:1, 16:1, and 13:1.

The ratio describes how many revolutions the motor has to do to complete a full cycle. A lower ratio means a faster rate of fire, but also less torque.

A faster rate of fire means you will have to use a less powerful spring. It is all entirely up to you!

Metal gears work better than plastic gears for an upgraded Gel Blaster. Just remember that the piston ladder should ideally be the same material as the gears.

Shimming the gears is also important. The more stress you put on your equipment, the more well-balanced each part must be to ensure that the entire weapon does not malfunction or break.

Shimming is the process of making sure the gears are perfectly in line with each other. Shim sets are cheap, and it just takes some patience and time to balance your gears.

Motor

The motor can be fast or strong, although most are both and just differently balanced.

If a high firing rate is your thing, choose a motor balanced for speed. If you want high velocity and accuracy and are prepared to sacrifice firing rate, a high torque motor is more suited for you.

Observe caution while changing out the motor. Gears and tappets can break, giving you some serious problems.

Cables

Cables are what connects everything and transfers power from the battery to the motor through the trigger.

Upgrading the standard cables that come with your gun can improve the transmission of power and minimize loss. However, it will not change the fact that the metal switch behind the trigger will slowly be burnt, and carbon builds upon the metal in the switch.

The most effective upgrade is a MOSFET. In its most simple form, a MOSFET is an electronic switch that sits between the battery and the motor, shortening the distance between battery and motor.

This upgrade will let you use a low power through the trigger switch, saving it from burns and stress.

Glow-In-The-Dark Gel Balls?

Tracer Unit

A tracer unit sits at the end of the barrel and contains one or more LEDs that will charge up your Glow-In-The-Dark Gel Balls so they will make impressive laser-like streaks when fired.

The tracer units charged separately with battery. A tracer unit might be difficult to use with a hopup since they both sit at the same place.

If you feel confident with soldering and electronics, you could even build your own tracer unit or tracer t-piece. Here is a link for a DIY Tracer unit.

Tracer Magazine

Instead of sticking a unit at the end of your barrel, you could use a tracer magazine. A tracer magazine will charge up your Gel Balls to glow when they are fed into the barrel.

Except for the potential muzzle flare, the effect is the same as the tracer unit.

The tracer magazine does not charged separately and uses the main battery.

Conclusion

Building your Gel Blaster can be both fun and rewarding. Some patience and research are needed, and many experts are on hand to swap ideas or give you advice if required.

Our team at Renegade Blasters love geeking out on our toys. Get in touch with us if you’d like us to help you build your own Gel Blaster Gun! We look forward to hearing from you.

Blog created and optimised by: The Digital Guruz, Sheffield Based SEO Experts

Posted on by — Leave a comment

Post-Covid Bucket List – Have A Blast with Gel Blasters

Gel Blasters

Gel Blasters – 2020 was a crazy year, and 2021 isn’t shaping up to be very much better. Many countries are still in lockdown, travel restrictions abound, and what used to be a small gathering is now deemed too risky and even illegal! 

There IS light at the end of the tunnel. Eventually, vaccinations will be more widespread than ever, herd immunity will be achieved, and this mess we got ourselves into will finally ease. 

Life goes back to whatever the definition of normal is at that time, and we finally get a chance to release all that pent-up energy and actually have a bit of fun with friends and loved ones. 

What’s the first thing you will do when restrictions are lifted? Most people want to travel, go to a concert, ditch their masks, and maybe just hang out at a bar without feeling irresponsible. 

We can’t wait to enjoy the outdoors in all its entirety again. Participating in team sports is a near impossibility these days. Basketball courts lie empty, beach volleyball is out of the question, and sports facilities look dismally abandoned.

Fear not! The time will come to play again. Australia has always been an outdoor adventure mecca, and it’s only a matter of time before we get a chance to hang out with friends, enjoy games, and get back to our active lifestyles.

Since international travel looks to be farther away, domestic travel seems more likely on the horizon. The best we are hoping for is for the lockdowns and domestic travel restrictions to ease up.

Our team was together one day, and we started wistfully talking about all the things we miss doing locally pre-2020.

We thought we’d share it with you and maybe give some inspiration for some ideas of cool stuff to do once the world stops blowing up.

Get An Adrenalin Fix In Queensland

Everything Australia operates in Cairns and has a bunch of fun stuff for the adrenaline junkie. Skydiving, bungy jumping, rafting, and a giant swing are all available for those that want a quick surge of adrenalin. The AJ Hackett’s 50-meter Bungy in Cairns is the only Australian operational jump. 

For those that want an even better fix, launch yourself out of an airplane at 14,000ft above sea level and enjoy spectacular views of the Great Barrier Reef.

Sixty seconds of free fall at speeds of up to 200 km/h might be a little distracting so remember to savor your surroundings! 

Explore The Great Barrier Reef

Preferably, underwater! A multitude of dive operators are ready to take you exploring the pristine waters of the reef. It might be the perfect time to introduce yourself to the underwater world with excellent visibility and beginner-friendly dive sites everywhere. 

Experienced divers will also rejoice, as strong currents bring pelagic fish like sharks, rays, tuna, and barracudas. 

Bonus Tip: For an added kick, the best places to go shark diving are Port Lincoln, where the Great Whites are, Whale Sharks in Ningaloo, and Nurse Sharks in the north. The Great Barrier Reef also has an array of reef sharks with which you can dive without a cage. 

Climb A Rock 

NSW’s Blue Mountains and Victoria’s Arapiles are stellar international destinations that are known to climbers worldwide. If you don’t want to drive or fly across the country, Kalbarri is no Grampians but is Western Australia’s most beginner-friendly destination. 

With routes of all difficulties, there will be something for beginners and spider-people alike. Ensure to get proper climbing instruction before heading off; plenty of guides and instructors will give quality education and keep you safe. 

Climbing gyms are also an excellent way to get introduced to the sport and determine if you want to pursue it further. Many climbing gyms pepper the country with quality instruction. Gyms are also a great way to meet like-minded people and get the skinny on all things climbing.

Take A Road Trip

Pack those sleeping bags, tent, and other camping necessities, pick a direction, and start driving! Land exploration is surprisingly satisfying, and you get to check out plenty of places that you’d usually miss. 

Love driving? The “Big Lap” is Highway #1, an impressive 14,935km stretch of pure road. It connects all the major cities and is the most widely used highway in Australia. 

Did You Know? The speed record for this road is just over five days. Ideally, folks should take three months, and some take up to a year, frequently stopping in the most exciting places. “Grey Nomads” are retirees that travel this route permanently! 

Surf Some Waves

With world-class, pristine beaches, Australia is home to some of the best breaks. Suitable for all levels, the massive coastline on the east coast is scattered with beginner-friendly breaks, with friendly, expert instructions more than willing to take you out on the water.

Grab some boardies and a rashie and head to these beginner-friendly breaks:

  • Noosa, Queensland
  • Coolangatta, Gold Coast
  • Byron Bay, NSW
  • Yamba, NSW
  • Crescent Head, NSW

Shoot Your Buddy With A Gel Blasters

‘

Gel Blasters

Of course, right on top of our list of favorite activities to indulge in is playing with our Gel Blasters. These fantastic toys became popular in Australia over the last few years. 

Shooting eco-friendly, biodegradable gel balls at friends in a military-style war arena? Heck yeah! AND, they hurt less than paintball pellets and are suitable even for kids.

Most are familiar with paintball. Perhaps you’ve played it, or at least understand the basic concept of it. You might also be unfortunate enough to know how much it hurts! 

Gel bells hurt way less. Made up of 94% to 98% water, these gel balls are made of an eco-friendly polymer such as Polyacrylamide, Polymethyl acrylate, or Sodium polyacrylate. They explode on impact and biodegrade fast. 

Gel Blasters For Beginners 

Gel Blasting is a tactical game played as a CQB (Close Quarters Battle). Also known as Close Quarters Combat, it involves sticking a bunch of people in an enclosed area and having them shoot each other. Sometimes played in nature in a limited zone, it can also be played in specially created enclosures.

Gel Blaster games are team-based matches. To get the most fun out of each game, team up with some friends or join an existing team. 

When forming your own team, be prepared to be the team leader and tactician. Ensure your team has different abilities and play each person to their individual strengths and weaknesses. If you feel someone else has better tactics than you do, don’t be afraid to pass on the torch.

When joining an existing team, be a good team player and follow the team leader’s instructions. You’re on the same side, and inflated egos have no place in a team sport! 

Success in Gel Blaster games depends primarily on three components; surprise, speed, and violence of action.

Surprise 

Just like any other versus battles, taking the opposing team by surprise works best. This might be hard to achieve in a gel blaster game though; most folks are prepared for a fight from the get-go and won’t be drinking coffee or eating cookies when you blast through their door.

Speed

The faster you move, the quicker the enemy team has to react to get you. A fast-moving target is also harder to hit, so move those feet and work on those sprints.

Violence of Action

Pin them down! Make sure you take control of the area as fast as possible and keep the enemies from being able to retaliate. Shoot anything that moves, but watch the friendly fire and avoid hitting your buddies. 

Each team member should have a different role in a Gel Blaster game. 

Rifleman

The most common role, is probably where a beginner should be. You’ll need a rifle, not a shotgun or a sniper rifle.  

Pointman

For the brave, the point man is the first one through the door and likely to be the first to get shot and eliminated. Sticking beginners in this role to be sacrificed might be cruel and might be a good tactic for the actual win.

Support Gunner

As a support gunner, your responsibility is to cover the assault team’s six when they charge into action. Support gunners usually use machine guns with big magazines, ensuring the baddies don’t sneak up on the primary assault team. 

Sniper

As a sniper, you are in hiding and taking out high-value targets one by one, protecting the rest of your team from afar.

The game in itself is honor-based since there is no way to prove a hit. Anyone being hit has to call it out and hang the head in shame. 

Since the Gel Balls are lightweight, so a hit can be easy to miss, especially if protective gear and padding are worn. Don’t let that spoil the mood, and remember you’re all there to have fun.

Airsoft Guns and Paintball Markers

Gel Blasters, Airsoft Guns, and Paintball Markers are great for playing those games; they are toys that only exist to let people have a bit of fun.

They all shoot projectiles that can hit targets at a distance and possibly make you look really cool handling them. Those sports are very similar; the type of ammunition is what sets them apart.

As is stated in the name, paintball guns use balls filled with paint, leaving pieces of the gelatine shell and, of course, a lot of paint for you to deal with. This might pose a problem, especially if it’s a rainy day and you decide to fire a few rounds in your house or apartment. 

Airsoft Guns shoot plastic pellets (BBs) with a diameter of 6mm (or the more uncommon size of 8mm) with a few different weights, from 0.12 gram up to 0.40 gram. 

The pellets are available in different colors, including glow-in-the-dark features for tracer bullets. Tracer bullets are charged up with light because when they are ejected by a flash added to the barrel. 

Airsoft pellets are usually made of one of two materials: 
  • ABS plastic (the standard pellet) has to be picked up and disposed of.
  • PLA plastic (the bio pellet) is biodegradable and will decompose in nature in about one year.

Gel Blasters are also known as gel shooters, gel markers, gel guns, hydro blasters, and gel soft guns. They are a multitude of different blasters that come in various shapes and forms. 

Gel Blasters use water-soaked 7-8mm gel balls that you presoak for a few hours before use. The gel balls will evaporate by themselves, leaving you with little to no cleanup hassle. 

So let’s take a look at some differences with these different types of Gel Blaster guns:

The first thing you’ll notice is the looks. Paintball Markers are bulkier due to the large barrels and magazines and rarely look like an actual firearm. 

Because of their slim barrels, the Gel Blasters and Airsoft Guns are available as replicas of famous weapons such as handguns, sniper rifles, assault rifles, and submachine guns.

  • Glock G18 (SKD Auto/Semi-Auto Glock G18), a handgun
  • M4 (JM M4A1 Gen 8.5 Gel Blaster), an assault rifle
  • NWELL MB05 (NWELL MB05 Tactical Metal Sniper Gel Blaster), a sniper rifle
  • Scar V (JM SCAR V2 Gel Blaster), an assault rifle
  • Beretta 90-Two (SKD Beretta 90TWO 14.8v Auto Gel Blaster), a hand gun
  • Desert Eagle (RX Desert Eagle Gel Blaster), a massive handgun
  • Glock 18 (YJD Glock G18 Hopper Fed Gel Blaster), a handgun
  • Vector V2 (LeHui Kriss Vector V2 Gel Blaster), a submachine gun
  • Beretta M92 (JM M92 Beretta Gel Blaster), a handgun
  • Galaxy M82A1 (Galaxy Barrett M82A1 Manual Gel Blaster Sniper), a sniper rifle

These Gel Blasters look just like the real thing, so you make sure you don’t bring them out to play in public places. Even though you know they are toys, others might get freaked out and call the cops, which is a reasonable thing to do if you see someone with a weapon. That’s not going to be a very good day. 


The cost of ammunition also differs, and since this is running cost, it will matter over time.

Paintball Markers have the highest cost; 500 balls can easily set you back $20-30 for a decent brand. 

Airsoft pellets are much cheaper than Paintballs; you’ll get 4000 to 5000 of those tiny pellets for the same price. 

The cheapest of the lot are the gel balls; the same amount of money will get you about 30,000 pretty little gel capsules of good quality. 

The price of the different gun types is pretty similar. Better quality guns cost more, and extra features and upgrades can cost a pretty penny. Common upgrades include scopes and grenade launchers. 

How do Gel Blasters work? 

There are two types of propulsion; mechanical and gas. 

The mechanical propulsion is driven by a battery-powered electric motor that coils a spring, although some handguns and sniper rifles use a spring you manually activate.

Gas-powered Gel Blasters are relatively new to the market, but they have already gained popularity. They use small gas canisters similar to the ones used in Airsoft guns.

The impact of the bullets determines the minimal level of protective gear you’ll need. Paintballs being the heaviest and fastest, require the most protection, followed by the Airsoft gun. Gel Blasters have the least impact, therefore requiring less protection. 

Gel Blasters eject their ammunition somewhere between 150 and 300 feet per second and can discharge up to 30 gel balls per second, depending on the model. 

Pistols are at the lower end of the range, while rifles fire at a higher velocity.  

Knowing that the bullets are lightweight beads of water, gel blasting is a pretty safe sport. The point of impact will generate little to no pain as the gel ball collapses into gel and water.

Depending on your pain tolerance, you might feel a nip and have a temporary red mark that will go away in hours. A hit from a rifle might hurt a tad more and carry a mark that lasts a day. Gel balls will never pierce or penetrate the skin. 

Protective eyewear is required at all types of sports where things are coming at you with high velocity and is recommended for Gel Blaster games. 

The Gel Blaster is a relatively harmless toy and a great source of fun, but you should always treat it like it is loaded with the safety off, and just like a regular gun. 

Be aware as well of your surroundings. Hitting an innocent bystander is not going to be very fun for both of you. 

So what is essential when you buy your first Gel Blaster?

First of all, set your budget. 

With a vast range of guns to choose from, it’s easy to go wild with the shopping. We don’t like splurging but also don’t stinge on hardware purchases. Low-quality guns tend to be shelved and unused. 

Look online and in shops for combo deals that pair guns and ammunition. They should give you all you need to get started with gel blasting. 

If your friends are already playing, you’ll probably want to get enough gear to join them for team play. 

If you plan to spend some time with target practice in your backyard (or your kitchen, we don’t judge), you’ll get away with a Gel Blaster, protective eyewear, and a bunch of Gel Balls.

Remember to buy the Gel Balls from your supplier; the standard ones that will come with your Gel Blaster are usually of inferior quality.

The type of gun will be dictated by the kind of role you want to play. If you’re going to play a sniper, you’ll need a sniper rifle. Most beginners start with a handgun or an assault rifle, but there are many options, including shotguns and sniper rifles. 

After you figure out what type of gun you want, start researching different brands that have that particular type. 

Gel Blaster reviews online are aplenty. Forums might also be a good source of information. Look for a reliable dealer; there are plenty of online shops to choose from.

Your first gun will be your entry into the world of gel blasting, so choose well and ask the experts. 

Gel Blasters are fun, basically harmless toys that you can use for a friendly war game with your friends. Some of their key features are:

  • Eco-friendly ammunition (water!)
  • It is safe; only safety eyewear is needed
  • Cheap ammunition (again, water)
  • Low impact; little to no discomfort when you get hit
  • No litter, the Gel Pellets disintegrate into water
  • Lots of upgrades available

Firearm ownership is hugely regulated in Australia. Airsoft guns are entirely banned. Gel blasters are illegal across most of the states. The only state that allows them in Queensland. 

You’ll need a firearm license in most other states. It is a serious criminal offense to own a gel blaster without a firearm license. 

Queensland – 100% legal to purchase from reputable businesses, legal to own, and no license is needed. You’ll need to conceal it and cannot carry an unconcealed gel blaster in public. 

Western Australia – Gel blasters are not legal, according to the parliament of Western Australia. While they may be illegal at present, they are constantly reviewing their purpose and may make it legal at some point in the future.

South Australia – In October 2020, the South Australian Police decided to regulate gel blasters as firearms. Anyone in South Australia wanting a gel blaster has to apply for a category four shooting license. 

Tasmania – If they replicate a real firearm and have ammunition, gel blasters are illegal. However, it is not unlawful if the gel blaster does not look like a firearm and is intended to be used as a toy. 

NSW – You’ll need a firearm license or permit. Gel blasters are often referred to as an airgun and fall into the firearm category.

Victoria – They are illegal and classed in the same category as a firearm. 

Blog created and optimized by: The Digital Guruz, London Based SEO Experts